Prestige Sugatsune Multipurpose Soft Closing Waste Chute 220mm
- 304 Stainless Steel gauge 1.5 mm
- Satin Stainless Steel finish
- Suitable for counter top - horizontal installations only
Sugatsune Multipurpose Soft Closing Waste Chute
The prestige counter mounted circular waste chute with soft closing damper lid. Quality mechanism ensures that the close function takes safety into account. The lid closes slowly and smoothly when released, no sharp edges. The maximum disposal opening area is 30 cm2 suitable for a wide range of waste products.
This quality chute is made from 304 Stainless Steel suitable for domestic, busy kitchens, wet or humid areas. The waste chute is suitable for counter mounted installation only. Provides discreet access to under-counter waste receptacles (not included).
- Designed for used towels or linen and a wide range of larger waste products
- Slow, soft closing lid mechanism
- No sharp edges
- 25 cm2 of discreet waste disposal
- No unpleasant noise when lid closes
- Flange lip: 12 mm
- Outer Diameter 220mm
- Inner Diameter 196 mm
- Hole cut: 195 - 200
- 304 Stainless Steel gauge 1.5 mm
- Satin Stainless Steel finish
- Suitable for counter top - horizontal installations only
| SKU | AD-GD020-HL |
|---|---|
| Finish | Satin Steel |
| Height (mm) | 36 |
| Outside Diameter (mm) | 220 |
| Inside Diameter (mm) | 196 |
| Waste disposal area (cm2) | * |
| Hole cut out diameter (mm) | 195 - 200 |
| Steel gauge (mm) | 1.5 |
| Installation | Counter Tops Only |
| Mechanism Operating Temperatures (C) | 0 - 40C |
| Steel Type | 304 |
| Warranty | 10 Years |
| EAN: | 4510932180283 |
What waste products can you dispose through this chute?
This chute was designed for putting used towels and linen within a discreet storage bin. This discreet chute is also ideal for items like Large bottles, cups, and larger general waste products.
Can you trap fingers in this chute?
This chute lid has no sharp edges and closes very slowly. This quality chute was designed with safety in mind.
Is the lid a tight seal around the rim?
No there is a small gap of 2 mm around the rim as shown on the image.
Where is this product manufactured?
Japan
| SKU | AD-GD020-HL |
|---|---|
| GTIN | 4510932180283 |
| Weight | 1.000000 |
| Warranty | 10Years |
| Quick Code | 7713 |
| Manufacturer | Prestige |
| Delivery | Next Working Day |
