Prestige Sugatsune Multi Purpose Soft Closing Waste Chute - 308mm
- No sharp edges
- Disposal waste area: H128mm x W182mm
- No unpleasant noise when lid closes
- Flange lip: 1.2 mm
- Outer Dimensions (mm): H234 x W308
- Inner Dimensions (mm): H160 x W234
- Hole cut: H210mm x W280mm
Prestige Sugatsune Multi Purpose Soft Closing Waste Chute - 308mm
Quality Under counter mounted square waste chute with soft closing lid. The damper mechanism ensures that the close function takes safety into account.
The lid closes slowly and smoothly when released with no sharp edges. The maximum disposal opening area is H160mm x W234mm suitable for a wide range of waste products.
This quality chute is made from 304 Grade Stainless Steel suitable for domestic, busy kitchens, wet or humid areas.
The waste chute is suitable for horizontal installations only. It provides discreet access to under-counter waste receptacles (not included)
- Made of 304 stainless steel
- Resistant to rust
- Can be used around water
- Slow, soft closing lid mechanism
- No sharp edges
- Disposal waste area: H128mm x W182mm
- No unpleasant noise when lid closes
- Flange lip: 1.2 mm
- Outer Dimensions (mm): H234 x W308
- Inner Dimensions (mm): H160 x W234
- Hole cut: H210mm x W280mm
- Satin Stainless Steel finish
- Ideal for a wide range of waste products
- Suitable for horizontal undercounter
| SKU | AZ-GD230-HL |
| Finish | Satin Steel |
| Height (mm) | 234 |
| Outer Dimensions (mm) | 308 X 234 |
| Inside Dimensions (mm) | 234 X 160 |
| Waste disposal area (cm2) | 234 X 160 |
| Hole cut out diameter (mm) | H210 x W280 |
| Steel gauge (mm) | 1.2 |
| Installation | Horizontally Installation only |
| Steel Type | 304 |
| Weight (kg) | 1.4 |
| EAN: | 4510932037365 |
What waste products can you dispose through this chute?
This discreet chute is ideal for any waste items 234mm x 160mm in size, eg. sandwich boxes, large bottles and general waste products. This quality chute is ideal for busy professional kitchens or for use at home.
Can you trap fingers in this chute?
This chute lid has no sharp edges and closes very slowly. This quality chute was designed with safety in mind.
Is the lid a tight seal around the rim?
No there is a small gap of 2 mm around the rim as shown on the image.
Can you install the chute flat on a work surface?
No it must be installed vertically as shown on the picture for undercounter installations only!
Where is this product manufactured?
Japan.
| SKU | AZ-GD230-HL |
|---|---|
| GTIN | 4510932037365 |
| Weight | 2.000000 |
| Warranty | 10 Years Warranty |
| Quick Code | 7522 |
| Manufacturer | Prestige |
| Delivery | Next Working Day |
