Bobrick Fino Surface-Mounted Automatic Hand Dryer 0.2kW
- ADA Compliant
- Power: 200watts
- Drying Speed: 10-12 Seconds
- Fino Collection
- Surface-Mounted
Bobrick Fino Surface-Mounted Automatic Hand Dryer in Brushed Stainless Steel.
The Bobrick Fino Collection is a seam welded stainless steel high-speed hand dryer with power consumption of just 200 watts. The ADA complaint Hand Dryer is perfect for any washrooms, especially where sleek design is needed.
GreenSpec certified and ADA compliant with less than 4″ protrusion from the wall. With a drying speed of 10-12 seconds, an automatic, infrared, no touch Hand Dryer finished in Brushed Stainless Steel.
- Vandal resistant air inlet 1.2mm gauge stainless steel
- Stops automatically after hands are removed
- Material: Grade 304 Stainless Steel
- Finish: Brushed Stainless Steel
- Dimensions: H342mm x W297mm x D100mm
- ADA Compliant
- Power: 200watts
- Drying Speed: 10-12 Seconds
- Fino Collection
- Surface-Mounted
| Product Code | B7179 |
| Finish | Brushed Stainless Steel |
| Dimensions (mm) | H342 x W297 x D100 |
| Power | 110 – 240 volts 50/60 Hz |
| Current Consumption | 2.0 Amps, 115 volts / 1.0 Amps, 230 volts |
| Nominal Output | 0.2 kW |
| Drying Speed (seconds) | 10-12 Seconds |
| Control System | Automatic, infrared, no-touch |
| Air | 34 m3/h, 50 m/s, 100mm, 23°C, 20°C ambient |
| Material | Type 304, 18 gauge (1.2mm), stainless steel |
| ADA Compliant | Yes |
| EAN Number | 716954020543 |
What is the recommended height to be installed?
The manufacturers recommended height should be 1.16m up from ground floor
What is the sensor range?
The Fino sensor will pick up movement within a range of 150mm (6")
How long will the hand dryer run with hands under the sensor?
The maximum run time is 85 seconds. The Fino will not reset itself until the object has been removed.
How is the hand dryer fixed to wall?
The Fino is supplied with wall mounting template and installation instructions for both brick and dry wall installations
Can this dryer be installed above a sink?
The Fino hand dryer should be 500mm above any projection or horizontal surface which may interfere with the operation of the automatic sensor.
| SKU | B7179 |
|---|---|
| GTIN | 716954020543 |
| Weight | 5.000000 |
| Warranty | 5 Years |
| Quick Code | 4210 |
| Manufacturer | Bobrick |
| Delivery | 1-2 Working Days |
